1. Ford Edge
  2. Owner info
  3. Oil Capacity
  4. 2019

2019 Ford Edge Oil Capacity

The 2019 Ford Edge oil capacity depends on the engine: the 2.0L EcoBoost takes 5.5 qt, while the 2.7L EcoBoost Nano takes 6.0 qt. Both listed engines use 5W-30 oil. Check which engine is in your Edge before using the capacity figure; the values are not interchangeable.

Read each number as the listed oil capacity for that engine, alongside its specified oil grade. Capacity may change by engine, as it does between the two options listed for this year. These facts do not provide a separate figure by trim or a different grade for either engine, so do not assume another rating applies based on trim. If your vehicle’s engine or required figure is not covered here, confirm the specification on the door jamb or in the owner’s manual.

Use the listed capacity as a reference when servicing the vehicle, and follow the owner’s manual for the correct procedure and final level check. The figures above apply to the engines identified for the 2019 model; if you are uncertain which one your vehicle has, verify the engine information before selecting a capacity.

2.0L Ecoboost: 5.5 qt · 2.7L EcoBoost Nano: 6 qt

Catalog dataManufacturer figures stored on configuration rows

2.0L Ecoboost: 5.5 qt · 5W-30

  • 5.5 qt · 5W-30 · 2.0L Ecoboost
  • 6 qt · 5W-30 · 2.7L EcoBoost Nano

Questions

Does oil capacity vary by engine?
Yes. Stored capacities differ by engine label.
How much oil is stored for each engine?
2.0L Ecoboost: 5.5 qt; 2.7L EcoBoost Nano: 6 qt

Catalog oil filters

Catalog year/make/model rows for 2019 Ford Edge.

Viscosity and filter part numbers appear only when the catalog stores them. This is not an oil-change procedure.

Catalog fitment does not by itself prove OEM-equivalent compatibility.